Dosing units

Dosing for Diamond Liquids
	Spraying Arm 815 / 815 L
	• Length: 320 mm (for Wheel-Ø 380 mm - 700 mm) • Length: 455 mm (for Wheel-Ø > 700 mm) • 2 spraying nozzles for diamond and fluid • hose-Ø 3,5 mm • for connection to SPS-M/MP or SPS-S incl. dripper for reducing of drizzle

	Linear Feed Unit
	• for betterspreading of lapping media on the lapping wheel • as from lapping wheel-Ø 610 mm • anti-twist protection • rubber gaiter for protecting the plunger of abrasive media • cable drag chains for directing the dosing lines • without spraying arm

	Dosing Unit S2
	• pneumatic spraying unit, recommended for diamond slurry and fluid • 2 glass container 0,5 Liter • 1 stirring device for diamond liquids • start / stop for stirring device engine • hose-Ø 3,5 mm • 2 manual pressure controller with manometer 0-4 bar • for connection to control unit SPS-M/MP or SPS-S

	Dosing Unit 809b
	• 2 glass container 0,5 Liter • 1 stirring device for diamond liquids • hose-Ø 3,5 mm • 2 clock timer for setting of dosing time and pause time • automatic / manual dosing for 2 media • 1 manual pressure controller with manometer 0-2,5 bar • for connection to machines with Control unit LC and AS/AS-P or for upgrading already built machines

Dosing Devices for several media
	Dosing Unit P11
	• 1 peristaltic pump, 24 V DC/2 W • hose-Ø 2/3,5 mm, volume flow 55 ml/min • clock timer for setting of dosing time and pause time • 1 stirring device for diamond fluids, 230 V AC/28 W, 250 rpm. • start / stop for stirring device engine • automatic / manual dosing • 1 glass container 0,5 liter (optional: plastic container 2 liter) • for connection to control unit LC, AS/A-P or as an add-on kit

	Dosing Unit P12
	• 1 peristaltic pump, 24 V DC/7 W • hose-Ø 5 mm, volume flow 280 ml/min • clock timer for setting of dosing time and pause time • 1 stirring device for diamond fluids, 230 V AC/28 W, 250 rpm. • start / stop for stirring device engine • automatic / manual dosing • 1 glass container 0,5 liter (optional: plastic container 2 liter) • for connection to control unit LC, AS/A-P or as an add-on kit

	Dosing Unit P21
	• 2 peristaltic pumps, 24 V DC/2 W • volume flow 55 ml/min • hose-Ø 2/3,5 mm • 1 stirring device for diamond fluids, 230 V AC/28 W, 250 rpm. • start / stop for stirring device engine • 2 glass container 0,5 liter (optional: plastic container 2 liter) • for connection to control unit SPS-M/MP or SPS-S

	Dosing Unit P22
	• 2 peristaltic pumps, 24 V DC/7 W • volume flow 280 ml/min • hose-Ø 5 mm • 1 stirring device for abrasives, 230 V AC/28 W, 250 rpm. • start / stop for stirring device engine • 2 glass container 0,5 liter (optional: plastic container 2 liter) • for connection to control unit SPS-M/MP or SPS-S

	Mobile dosing unit
	• 1 peristaltic pump, 24 V DC/7 W • hose-Ø 5 mm, Volume flow 280 ml/min • clock timer for setting of dosing time and pause time • 1 mixing device for abrasives, 230 V AC/28 W, 250 U/min. • start / stop for mixing device enginee • automatic / manual dosing • 1 glass container 0,5 liter (optional: plastic container 2 liter) • for connection to control unit LC, AS/A-P or as an add-on kit

Dosing Devices for conventional Abrasives
	Dosing Arm
	• a loop prevents sedimentation and blockage of the dosing lines • inlet hose 1/2 inch • outlet hose 3/8 inch • control by a squeeze valve 12/24 V • 3-fold distribution (plastics), incl. pipeline (V2A) Ø 6/4 mm • V2A profile incl. mounting wheel

	Lapping Medium Pump with Tank
	• Performance data lapping medium pump 230 V, 0,055 kW, 50 Hz, 0,55 A • mixing via the propelling screw of the pump • connection for hose 1/2 inch • tank capacity approximately 8 L • usable with any kind of abrasives • beveled bottom for optimal mixing of the medium • top cover with 2 holes Ø 50 mm for medium pump and drain

	Manual Time-relay Control
	• enables the control of the squeeze valve in the dosing arm • for 1 medium • star / stop • clock timer for setting of dosing time and pause time • automatic / manual dosing • for connection to control unit LC, AS/A-P or as an add-on kit